[Analysis of symptoms and influencing factors of low back work-related musculoskeletal disorders among workers in a container manufacturing factory].

Objective: To investigate the occurrence of low back work-related musculoskeletal disorders (WMSDs) among workers in a container manufacturing factory, and to explore the influencing factors. Methods: In June 2022, 952 workers from a container factory were selected as the research objects by cluster random sampling. Through questionnaire survey, the incidence of low back WMSDs symptoms among workers in the past one year was collected, and the influencing factors of low back WMSDs were analyzed by logistic regression. Results: The incidence rate of low back WMSDs was 46.7% (445/952). The factors with higher exposure at work were frequent slight bending (77.0%, 733/952), frequent overtime (74.1%, 705/952), and the need to turn around while working (62.3%, 593/952). Multivariate logistic regression analysis showed that age over 40 years old, smoking, drinking, often bending over slightly, sitting for a long time, maintaining a large bending posture for a long time, often working overtime, limited operating space, and there was always a need to complete conflicting things in the container manufacturing factory workers were the risks of increasing the low back WMSDs (OR=1.68, 1.96, 2.47, 1.49, 1.84, 2.11, 1.90, 1.82, 2.00, P<0.05). Standing at work, always friendly colleagues, and always supportive and helpful leaders were protective factors for low back WMSDs (OR=0.60, 0.32, 0.40, P<0.05) . Conclusion: The incidence of low back WMSDs symptoms in container manufacturing workers is high, and work-related factors such as frequent slight bending, long time holding large bending posture and limited operating space are the focus of ergonomic intervention in container manufacturing enterprises.

Crystallization mechanism of the Pt50Au50 alloy with grain boundary segregation during the solidification process.

The crystalline mechanism of the Pt50Au50 alloy with grain boundary (GB) segregation during the rapid solidification process is investigated using molecular dynamics simulations. The cluster evolution and phase transformation processes during the GB segregation are analyzed by means of the energy temperature (E-T) curve, the pair distribution function (g(r)) curves, common neighborhood analysis (CNA), cluster-type index method (CTIM) and three-dimensional visualizing analyses. It is found that the GB segregation phenomenon of the Pt50Au50 alloy comes from various solidification temperatures of Pt- and Au-centered clusters. Four critical temperatures T1 (1153 K), T2 (1073 K), T3 (853 K) and T4 (753 K) are discovered during the liquid-solid transition, corresponding to the supercooled liquid, Pt-centered atom nucleation, Pt-centered cluster growth, Au-centered atom nucleation and grain growth process, respectively, which is observably different to the solidification process of other alloys. The Pt atoms begin to gather together in the high-temperature liquid before the liquid-solid transition. It is also found that the CTIM proposed by us would provide an effective tool to investigate the GB segregation process.

Metagenomic next-generation sequencing vs. conventional detection methods for detecting the pulmonary infections.

OBJECTIVE: The absence of proper pathogen treatment in the early stages can result in missing out on treatment chances or the overuse of antibiotics, both of which are the primary factors behind fatalities caused by lung infections. In this study, we aimed to investigate the efficacy of metagenomic next-generation sequencing (mNGS) in comparison to conventional detection methods in detecting infectious pathogens. PATIENTS AND METHODS: In this retrospective study, the infection pathogens of 104 patients were examined, and 86 bronchoalveolar lavage fluid (BALF), eight pleural effusions, and ten sputum samples were collected. The conventional detection approaches and mNGS analysis were used to determine the infection pathogen profiles and their detection rates were analyzed. RESULTS: Our study showed that mNGS was more sensitive (89.42%) than the conventional detection methods (56.73%) (p < 0.001), with a 32.69% improvement in sensitivity. The efficacy of mNGS in detecting mixed infections was significantly higher than that of conventional detection methods, with a detection rate of 85.29% compared to 17.65% (p < 0.001). The study demonstrated that mNGS had a higher sensitivity than the conventional detection methods when it came to diagnosing pulmonary infections, making it a potentially useful tool for clinical diagnosis. CONCLUSIONS: Combining mNGS with other pathogenic detection techniques can be an effective way to increase the rate of detecting pulmonary infections, as well as to provide guidance for treatment adjustments. Furthermore, the timing of sample collection and antibiotic administration can influence the effectiveness of mNGS when used on BALF specimens.

Effects of drinking water temperature in winter on growth performance, water consumption, surface temperature, and intestinal development of geese from 21 to 49 days of age.

This research aimed to investigate the effects of drinking water temperatures on growth performance, water consumption, surface temperature, organ indices, blood parameters, and intestinal development of geese, and determine the optimal drinking water temperature for 21 to 49-d geese. A total of 192 twenty-one-day male Yuzhou white geese were allocated randomly to 4 groups with 8 replicate pens per group according to the drinking water temperature (drinking water temperature [7℃-12℃] at ambient temperature [TC], 18℃ [T1], 27℃ [T2], and 36℃ [T3], respectively). The results showed that increasing drinking water temperature did not significantly improve the BW, ADG, and ADFI of geese (P > 0.05), whereas drinking warm water of 36℃ for geese had a trend to increase FCR (0.05 < P < 0.1). Geese in group T2 drank the most water per day on average, whereas geese in group TC drank the least (P < 0.001). Geese in groups T1, T2, and T3 had higher eyes temperatures than group TC (P < 0.001). No significant differences were found on the organ indices and blood biochemical parameters (P > 0.05). Geese from group T1 had higher crypt depth and muscularis thickness of duodenum (P < 0.05), and lower ratio of villus height to crypt depth than other groups (P < 0.001). Geese from group T1 had higher activities of trypsin in duodenum and jejuna and amylase in jejuna at 49 d than other groups (P < 0.01). Overall, these data indicate drinking water at 18℃ can increase water consumption and eyes temperature, and improve the activity of digestive enzymes and promote intestinal development. Under our experimental conditions, we recommend that the optimal drinking water temperature for geese from 21 to 49 d of age is 18°C.

[Effects of individual factors and labor organization on neck pain in auto assembler].

Objective: To investigate the influence of individual factors and labor organization on the prevalence of neck pain (hereinafter referred to as neck pain) in automotive assemblers, and to provide a basis for enterprises to optimize neck pain interventions. Methods: A cluster random sampling method was taken in January 2021, at an automobile manufacturing plant in Shiyan, 656 assemblers with ≥1.0 years of service were selected, the "Musculoskeletal Disorder Questionnaire" was used to investigate the incidence and influencing factors of neck pain. Pearson χ(2) test or trend χ(2) test was used to compare the data rates. The influencing factors of neck pain were analyzed by multivariate logistic regression. Results: The prevalence rate of neck pain (hereinafter referred to as the prevalence rate of neck pain) of automobile assemblers within one year was 53.94% (342/634) . The prevalence of neck pain in women was higher than that in men (69.1% vs 48.6%, P<0.01) . The prevalence of neck pain was related to length of service, self-assessment of fatigue, working hours per week, working in the same workshop, rest days per shift, and accumulated rest time per shift (P<0.05) . Multivariate logistic regression analysis showed that the risk of neck pain in women was 2.434 times higher than that in men; The risk of neck pain increased by 18.9% for each hour of work per week; Rest during work was a protective factor for neck pain. The number of rest per shift increased and the risk of neck pain decreased (r=0.405, 0.311, 0.302, 95%CI=0.205~0.803, 0.169~0.572, 0.142~0.642, P<0.05) . Conclusion: The annual prevalence of neck pain was higher in automobile assemblers. Enterprises should fully consider the influencing factors such as gender, working hours per week and the number of breaks when arranging production.

[Neck musculoskeletal disorders and their influence factors among welders in an automobile factory].

Objective: To explore the prevalence and risk factors of neck musculoskeletal diseases (MSDs) of welders among an automobile factory. Methods: In June 2019, a cluster random sampling method was used to select 677 electric welders from an automobile manufacturing plant in Shiyan City as the survey objects, and a questionnaire survey was conducted using the "Musculoskeletal Disorders Questionnaire" to analyze the prevalence and influencing factors of neck MSDs, and used logistic regression to analyze the relationship between the influencing factors and the prevalence of cervical MSDs. Results: The prevalence rate of MSDs in neck of welders was 54.8% (371/677) . The exposure rate of occupational factors, from high to low, were neckin a bent formord porsure was 71.6% (486/677) , repetitive head movements was 55.1% (373/677) , working in uncomfortable postures was 48.7% (330/677) and neck twisted was 46.8% (317/677) respectively. Sex, age, educational level, length of service, smoking, neck tilt, neck twist, working in uncomfortable posture and head repetitive movements were the risk factors of neck MSDs (P<0.05) . Multiple logistic regression analysis showed that, the main influencing factors of neck MSDs were sex, education level, age, length of service, smoking, neck tilt, working in uncomfortable posture (OR = 2.11, 2.03, 1.83, 1.21, 1.78, 1.90, 1.58, 95%CI: 1.28~3.48、1.47~2.81、1.33~2.52、1.03~1.41、1.22~2.60、1.28~2.83、1.11~2.27, P<0.05) , rest had protective effect on neck MSDs (OR= 0.38, 95%CI: 0.17~0.88, P<0.05) . Conclusion: Welders in automobile factory was highly exposed to occupational risk factors for neck MSDs. Occupational risk factors such as neck in a bent forward posture, working in an uncomfortable posture, prolonged siting, repetitive head movement should be the focus of intervention.

[Investigation on high-frequency hearing loss of noise workers in an automobile factory].

Objective: To investigate the high-frequency hearing loss (HFHL) of workers in an automobile factory and its influencing factors, so as to provide a scientific basis for occupational health management of noise workers. Methods: From March to July 2019, 2647 workers from an automobile factory were selected as the research objects by cluster sampling method. The basic personal information (such as gender, age, education level, height, weight, etc.) , history of ear disease, the history of detonation, history of exposure to ototoxic drugs, history of exposure to occupational noise, etc., were investigated by questionnaire and occupational health examination. Chi-square test was used to compare the detection rates of HFHL in different populations, and multivariate logistic regression model was used to analyze the influencing factors of HFHL. Results: The noise level of 2647 individual workers ranged from 75.0 dB (A) to 92.0 dB (A) , with an average of (84.14±2.47) dB (A) . The detection rate of HFHL was 17.2% (456/2647) . There were significant differences in the the detection rate of HFHL among workers of different gender, age, educational level, working age, noise exposure level, diabetes history, detonation history, smoking and drinking workers (P<0.05) . Multivariate logistic regression analysis showed that male, age ≥30 years old, smoking and noise exposure were risk factors for HFHL (P<0.05) . Conclusion: The detection rate of HFHL in automobile factory workers is high. Gender, age, smoking and noise are the influencing factors of HFHL. It is necessary to strengthen the noise control in the workplace and guide workers to choose healthy lifestyle.

[Cumulative noise exposure and the risk of high-frequency hearing loss relationships].

Objective: To explore the dose-response relationship between cumulative noise exposure and high-frequency hearing loss, and further to provide a basis for the control of occupational hazards of noise. Methods: A Meta-analysis of dose-response relationships was performed on the data of eligible literatures published in China from January 2000.1 to December 2019.12. Results: The initial combined Odds Ratio (OR) and its 95%CI in the Meta-analysis were 1.10 (1.08-1.12) . As the Begg's funnel plot and Egger's test indicated publication bias (t=5.97, P<0.01) , the Trim-and-Fill Method was used for OR value adjustment. The adjusted-OR was 1.09 (1.07-1.12) ; sensitivity analysis showed that the results of this Meta-analysis have high stability; subgroup analysis indicated that the ORs of the steady-state noise group and the non-steady-state noise group were 1.10 (1.08-1.12) and 1.14 (1.07-1.21) , the ORs of the old standard group and the new standard group were 1.10 (1.08-1.12) and 1.11 (1.00-1.24) , respectively. The nonlinear dose-response relationship curve demonstrated that the risk of high-frequency hearing loss increases rapidly after CNE reaches 95 dB (A) ·years. Conclusion: There is a definite dose-response relationship between CNE and high-frequency hearing loss, which can be used to predict the risk of high-frequency hearing loss in noisy workers.

[Prognosis analysis of local recurrence after excision of breast phyllodes tumors].

Objective: To examine treatment outcomes of breast phyllodes tumors and the prognosis factors of local recurrence. Methods: This retrospective cohort study included 276 patients who underwent surgical resection at Breast Center, Peking University People's Hospital from January 2011 to December 2019. Tumor subtype and histopathological features were determined from pathology reports, and the deadline of follow-up was September 30th, 2020. All 276 patients underwent open surgery, including 17 patients of mastectomy, and 259 patients of lumpectomy. The enrolled patients were all female, with age of (41.5±11.3) years (rang: 11 to 76 years), and tumor diameter of 35(28) mm (M(QR)). The Kaplan-Meier method and Log-rank test were used for survival analysis. The multivariate analysis was implemented using the Cox proportional hazard model. Results: According the pathologic test, there were 191 patients of benign phyllodes tumor, 67 patients of borderline tumor and 18 patients of malignant tumor. There were 249 patients with a follow-up of more than 6 months, and 14.1% (35/249) had local recurrence. The time-to-recurrence was (28.6±22.2) months (range: 2 to 96 months), (29.1±18.1) months (range: 2 to 80 months), (32.1±30.1) months (range: 5 to 96 months) and (12.0±6.9) months (range: 8 to 20 months) for benign, borderline and malignant phyllodes tumors. Tumor diameter (≥100 mm vs.<50 mm, HR=3.968, 95%CI: 1.550 to 10.158, P=0.004) and malignant heterologous element (yes vs. no, HR=26.933, 95%CI: 3.105 to 233.600, P=0.003) were prognosis factors of local recurrence. One death from malignant phyllodes occurred after distant metastasis. The 3-year disease-free survival rates of benign, borderline and malignant phyllodes tumor were 88.2%, 81.7% and 81.4% (P=0.300). Conclusion: Phyllodes tumors have a considerable local recurrence rate, which may be associated with tumor diameter and malignant heterologous element.

[Epidemiological analysis and screening mode of breast cancer screening in Fujian province from 2015 to 2018].

Objective: To analyze the screening results of breast cancer in rural women in Fujian Province from 2015 to 2018, and to explore the screening mode of breast cancer. Methods: Breast cancer screening was provided for 35-64 years old rural women in Fujian province. Color Doppler ultrasound was used as the primary screening method. Suspected patients were referred to mammography. Color Doppler ultrasound and breast X -ray 4-5 grade were diagnosed by pathology. Results: The incidence of breast cancer from 2015 to 2018 was 56.96/10 million, 94.41/10 million, 71.61/10 million, and 73.05/10 million, respectively. And the peak age of breast cancer was (46-55) years. From 2015 to 2018, the proportion of cancer in situ showed an overall upward trend. The sensitivity of color Doppler ultrasound was 79.06%, and the sensitivity of mammography for those diagnosed abnormally by ultrasound was 91.88%. Conclusion: Breast cancer screening for women of the right age is an important measure to raise the rate of early diagnosis and early treatment and reduce the mortality of breast cancer. Screening mode based on breast ultrasound is the most suitable technology. We need to further expand the coverage of screening, improve the screening system and process, and ensure the health of women.

Curcumin exerts protective effect on PC12 cells against lidocaine-induced cytotoxicity by suppressing the formation of NLRP3 inflammasome.

OBJECTIVE: To explore the protective effect of curcumin on lidocaine-insulted PC12 cells. MATERIALS AND METHODS: We first treated PC12 cells with different doses of lidocaine, and then treated the cells with curcumin or Nod-like receptor pyrin domain3 (NLRP3) inhibitor (MCC950). Subsequently, the cell viability, apoptosis, reactive oxygen species (ROS) production and NLRP3 inflammasome were detected by cell counting kit-8 (CCK8), Annexin V/PI staining, FCM and Western blot analysis, respectively, and the level of IL-1ß in PC12 cells was determined by an enzyme-linked immunosorbent assay (ELISA) kit. RESULTS: Lidocaine inhibited the viability of PC12 cells, and it induced cell apoptosis, promoted ROS release and activated NLRP3 inflammasome in PC12 cells, but its effects were reversed by the treatment of curcumin. Moreover, NLRP3 over-expression also induced cytotoxicity in PC12 cells, which was also rescued by the treatment of curcumin. CONCLUSIONS: Our study indicates that curcumin exerts protective effect against lidocaine-induced cytotoxicity on PC12 cells by suppressing the activity of NLRP3 inflammasome, which provides new ideas on screening natural product for neurological damage therapy.

[Epidemiological analysis on 1 052 cases of COVID-19 in epidemic clusters].

Objective: To understand the epidemiological characteristics of the cases of COVID-19 epidemic clusters, and explore the influence of family factors and social factors such as group activities on the spread of the disease. Methods: The data of cases of COVID-19 epidemic clusters from 19 January, 2020 to 25 February, 2020 were collected from the official platforms of 36 cities in 6 provinces in China. Descriptive statistical methods, χ(2) test and curve fitting were used to analyze the epidemiological characteristics of the clustered cases. Results: By 25 February, 2020, the data of 1 052 cases in 366 epidemic clusters were collected. In these clustered cases, 86.9%(914/1 050) occurred in families. Among the 1 046 cases with gender information, 513 were males (49.0%) and 533 were females (51.0%). The cases were mainly young adults between 18 and 59 years old, accounting for 68.5% (711/1 038). In the 366 epidemic clusters , the clusters in which the first confirmed cases with the history of sojourn in Wuhan or Hubei accounted for 47.0%(172/366). From 19 January to 3 February, 2020, the first confirmed cases with Wuhan or Hubei sojourn history accounted for 66.5%. From 4 to 25 February, the first confirmed cases who had Wuhan or Hubei sojourn history accounted for only 18.2%. The median of interval between the first generation case onset and the second generation case onset was 5 (2-8) days. The median of onset- diagnosis interval of the initial cases was 6 (3-9) days, and the median of onset-diagnosis interval of the secondary cases was 5 (3-8) days. Conclusions: Epidemic clusters of COVID-19 were common in many cities outside Wuhan and Hubei. Close contact in family was one of the main causes for the spread of household transmission of the virus. After 4 February, the epidemic clusters were mainly caused by the first generation or second generation cases in local areas, and the time for diagnosis became shorter.

[Study on the effects of noise on hypertension and hyperglycemia among occupational workers].

Objective: To study the effect of noise on hypertension and hyperglycemia among occupational workers. Methods: Total 670 workers in an automobile manufacturing company were selected as the subjects of physical examination in 2017. According to the noise exposure or not, the subjects were divided into control group (no noise exposure) 143 and contact group (noise exposure) 527. Questionnaire survey and physical examination were conducted. The measurement data were analyzed by t-test, and the count data and grade data were analyzed by χ(2) test. The influence of noise on blood glucose, heart rate, blood pressure and other indicators was analyzed by logistic regression, and the OR and 95%CI of each risk factor were calculated. Results: The average age of the control group and the contact group was no significant difference (P>0.05) . There were 139 (20.7%) cases of high systolic pressure, 154 (23.0%) cases of high diastolic pressure, 63 (9.4%) cases of hyperglycemia, 29 (4.3%) cases of tachycardia. Compared with the control group, there were significant differences in systolic blood pressure, diastolic blood pressure and blood glucose in the contact group (P<0.05) . Compared with the control group, the systolic blood pressure, diastolic blood pressure and blood glucose of the subjects in the corresponding age contact group increased significantly (P<0.05) . The years of noise exposure were protective factors for systolic and diastolic blood pressure (OR=0.970, 0.973) . Conclusion: Noise exposure may increase blood pressure and blood sugar of occupational workers, but the effect on heart rate can not be determined.

Prenatal diagnosis of maternal partial trisomy 9p23p24.3 and 14q11.2q21.3 in a fetus: a case report.

OBJECTIVE: This study aimed to report a fetus with maternal partial trisomy 9p and 14q and the phenotype detected in ultrasound. METHODS: The chromosome rearrangements in the fetus were characterized by G-banding and chromosome microarray analysis based on single nucleotide polymorphism (SNP) array of cultured amniocytes and compared with the parents' karyotypes. RESULTS: The fetal abnormal karyotype was 47,XY,+der(14)(9;14)(p23;q22). The SNP array revealed a duplicate 11.8-Mb 9p23-p24.3 fragment and a duplicate 29.6-Mb 14q11.2-q21.3 fragment. The peripheral blood karyotype of the mother was 46,XX,t(9;14)(p23;q22), while the father's was normal at the level of 300~400 bands. A high-resolution karyotype analysis conformed the same abnormality of the mother at the level of 550~650 bands. These results indicated that the fetal chromosomal abnormality probably derived from the mother. The fetal nuchal translucency thickness was 3.5 mm, and the fetal heart was detected with around 1.0-mm ventricular defect by the ultrasound examination at 12-week gestation. The couple decided to terminate the pregnancy. They opted for in vitro fertilization and embryo transfer for the fourth pregnancy, which was successful. CONCLUSIONS: The SNP array combined with cytogenetic analysis was particularly effective in identifying abnormal chromosomal rearrangements. These methods combined with the existing database information and fetal ultrasonography might provide a comprehensive and efficient way for the prenatal assessment of fetal situations. Preimplantation genetic diagnosis might effectively assist those women with an adverse pregnancy history in their next pregnancy.

Metal-Embedded Porous Graphitic Carbon Fibers Fabricated from Bamboo Sticks as a Novel Cathode for Lithium-Sulfur Batteries.

Lithium-sulfur batteries (LSBs) are deemed to be among the most prospective next-generation advanced high-energy batteries. Advanced cathode materials fabricated from biological carbon are becoming more popular due to their unique properties. Inspired by the fibrous structure of bamboo, herein we put forward a smart strategy to convert bamboo sticks for barbecue into uniform bamboo carbon fibers (BCF) via a simple hydrothermal treatment proceeded in alkaline solution. Then NiCl2 is used to etch the fibers through a heat treatment to achieve Ni-embedded porous graphitic carbon fibers (PGCF/Ni) for LSBs. The designed PGCF/Ni/S electrode exhibits improved electrochemical performances including high initial capacity (1198 mAh g-1 at 0.2 C), prolonged cycling life (1030 mAh g-1 at 0.2 C after 200 cycles), and improved rate capability. The excellent properties are attributed to the synergistic effect of 3D porous graphitic carbon fibers with highly conductive Ni nanoparticles embedded.